GFL 1800 SL

The GFL 1800 SL is solvent free Gap Filler Liquid based on a 2K silicone elastomer with 1.8 W/mK, 15 kV/mm and a viscosity of < 7000 mPas.
In comparison to other Gap Filler Liquids the viscosity is 1/10. Therefore, the material “flowing like water”, has the advantage of self-levelling and filling up every corner like a common potting material.
Scheda tecnica

Automotive electronics

Nippon Chemi-Con Corporation delivers reliability and safety for Automotive electronics market which has begun revolution in once-in-a-century. In addition to xEV electronics such as on-board chargers for EVs and plug-in hybrids, our products are also used in the electronic circuits that control engines and steering as well as a wide variety of other vehicle electronics including SRS airbags, air conditioners, and headlights. In recent years, we are seeing increased demand related to advanced driving assistant systems (ADAS, autonomous driving technology, and 48V system voltage conversion
Scheda tecnica

Diotec diodo BAV99

The BAV99 is a widely used small signal device in dual diode configuration. Its two diodes in series can be used for any kind of signal processing, and two parts can even form a bridge for high speed full wave rectifying. As different as the applications are the requirements on such device: High volume consumer devices require only low voltage levels, but especially low BOM costs. Industrial applications need higher power and voltage ratings, e. g. at 24 V industrial control units. Battery powered electronics must be operated with lowest possible leakage currents to allow for long stand-by times. Moreover, parts might need full AEC-Q101 qualification, in case of automotive use.
Scheda tecnica

Flexible & Reliable Connection

DEGSON DC Steel screw type DIN Rail terminal block possesses good performance on torque and anti-vibration. And it uses high-precision copper alloy conductor which can minimize the temperature rise to ensure the reliable and safe connection. The PA66 raw plastic material used by DC series can also endure a working environment of -40°C to 105°C. In addition, all DC series products are designed to meet the UL94 V0 flame retardant rating and the compact structure design makes the product performance more superior.
Scheda tecnica

Edo Components S.r.l.

Via Albert Einstein 14
20057 Assago MI - Italy
T. +39 02 45700794
F. +39 02 89952144

info@edocomponents.com

Via Albert Einstein 14
20090 Assago MI - Italy
T. +39 02 45700794
F. +39 02 89952144
info@edocomponents.com

Image